Español
1. We should carefully read the instructions for user and master the performance characteristics and operation methods of the screw oil press.
2.Before starting, conduct a comprehensive inspection, make sure the fasteners are not loose.
3.The oil machine is connected to the three-phase four-wire power supply, after the power is connected, the spindle should rotate counterclockwise. No matter what the situation, the machine must have a good grounding device, otherwise it can not be turned on.
4.Press the main motor button, (the host switch to the positive position) the host starts to run, the rotation direction should be counterclockwise rotation. If the direction is wrong, adjust the two live wires arbitrarily.
5.After the installation of the new oil press with oil cake and sand for 4 - 8 hours grinding, cannot be used to grab the crops in the hopper in the grinding.
6.Must keep the feed uniform, do not feed too much or too little or break the idle.
7. Stop feeding before shutdown, and then put a small amount of cake crumbs. Stop the machine until the remaining materials in the pressing film are exhausted and the cake is no longer discharged from the cake outlet. After shutdown, rotate the adjusting screw clockwise for 1-3 circles, and then disconnect the power supply.
Now you know how to operate, if you don't have an oil press, please contact VIC MACHINERY to buy them!
